

Project Background: Cold Storage Warehouse in Panama
YG Machinery received an order from a customer in Panama City, Panama, for a polyurethane foam spraying machine. The customer operated a cold storage warehouse and planned to upgrade the insulation of its roof and exterior walls.
The warehouse had previously used prefabricated insulation panels. After years of operation, some panel joints developed moisture problems and delamination. During a rainy-season inspection, the facility manager also found condensation beneath several roof sections. To address these issues, the customer decided to invest in polyurethane spray machine for on-site insulation work.
Why Chose YG Polyurethane Foam Spraying Machine
The customer needed a machine suitable for continuous roof and wall spraying, with stable material heating, sufficient output, and reliable pressure control.
After discussing the project requirements, YG Machinery recommended the YG-Q30 pneumatic spraying machine. Its 2–10 kg/min material output, 15 kW heating power, and maximum output pressure of 28 MPa made it suitable for the customer’s planned applications.
The main selection considerations included:
- Stable heating: Supports temperature control during two-component material delivery.
- Suitable output: 2–10 kg/min for different spraying requirements.
- Pneumatic drive: Suitable for continuous spraying applications with an adequate air supply.
- Compact design: Simplifies equipment transportation and site arrangement.
Electrical compatibility was also important because Panama uses a 60 Hz power system. YG Machinery needed to confirm the customer’s actual voltage, phase, and frequency against the machine configuration before shipment.


YG-Q30 PU Insulation Spray Machine Specifications
YG Machinery supplied the YG-Q30 pneumatic polyurethane spraying machine for the customer’s insulation project.
| Parameter | Specification |
| Model | YG-Q30 |
| Power Supply | 380V/220V |
| Heating Power | 15 kW |
| Total Power | 15.5 kW |
| Drive Type | Pneumatic |
| Material Output | 2–10 kg/min |
| Air Supply | 0.5–1 MPa, ≥1 m³/min |
| Maximum Pressure | 28 MPa |
| A/B Ratio | 1:1 |
| Heating Temperature | 0–85°C |
| Packaging Size | 850 × 850 × 1650 mm |
| Gross Weight | 200 kg |
| Air Compressor | 7.5 kW, 0.9–1.0 m³/min, 8 bar |
The YG-Q30 combines a pneumatic drive system with a 15 kW heating system. Its 1:1 material ratio supports compatible two-component polyurethane materials.
Equipment Delivery and Commissioning Preparation
After confirming the polyurethane spray machine configuration, YG Machinery prepared the equipment for export to Panama.
Important preparation and installation checks included:
- Electrical inspection: Confirm voltage, phase, and frequency compatibility.
- Air supply: Check compressor capacity and operating pressure.
- Material preparation: Verify compatible A/B polyurethane materials and the 1:1 mixing ratio.
- Trial spraying: Test on representative concrete and masonry surfaces.
- Parameter adjustment: Set suitable material temperature, pressure, spray distance, and application speed.
Spanish-language operating instructions are also useful for local operators and maintenance personnel.
Because of Panama’s humid climate, substrate moisture and environmental conditions must meet the polyurethane manufacturer’s application requirements. Proper surface preparation is essential for good adhesion and foam quality.


Machine Application: Roof and Wall Insulation
The YG-Q30 was supplied for the customer’s cold storage warehouse insulation project, covering concrete roof and exterior masonry wall applications.
The machine supports direct polyurethane foam spraying on prepared surfaces. This helps contractors cover irregular areas and reduce joints commonly found in prefabricated insulation systems.
Key application areas include:
- Concrete roof surfaces.
- Exterior masonry walls.
- Roof pipe penetrations.
- Parapet wall connections.
- Corners and irregular joints.
Compared with traditional panel installation, a pu foam spray machine can simplify the treatment of complex surfaces and help create a more continuous insulation layer.
The polyurethane roof insulation machine application also requires suitable foam thickness and protective coatings to ensure the complete insulation system performs as intended.
Polyurethane Spray Machine Price and Purchasing Advice
When comparing Polyurethane Spray Machine Price, overseas buyers should consider more than the initial purchase cost.
Important factors include:
- Machine output and working pressure.
- Heating capacity and material compatibility.
- Local voltage and frequency.
- Air compressor requirements.
- Spare parts and technical support.
YG Machinery provides polyurethane foam spray equipment for roof insulation, wall insulation, and other construction applications. Customers can share their project area, required foam thickness, local power supply, and material specifications to receive a suitable recommendation.


FAQ: Polyurethane Foam Spraying Machine
1. Can the YG-Q30 be used for roof insulation?
Yes. It supports compatible polyurethane foam applications on roofs and walls, provided the substrate and application conditions meet material requirements.
2. What is the output capacity of the YG-Q30?
Its material output ranges from 2 to 10 kg/min, depending on operating conditions and material requirements.
3. Can the YG-Q30 operate in Panama?
Yes, subject to electrical compatibility. The standard specification is 380V/220V, so the customer’s actual 60 Hz power supply must be confirmed before ordering.
4. Can polyurethane foam be sprayed in high humidity?
Application is possible under suitable environmental and substrate conditions. Contractors should follow the foam manufacturer’s requirements for humidity, temperature, and substrate moisture.
5. How can I get a quotation from YG Machinery?
Send YG Machinery your project details, required output, local voltage, and application area. Our team can recommend a suitable machine and provide a quotation.
Why Choose YG Machinery?
YG Machinery is a professional manufacturer of polyurethane foam spraying machines for roof insulation, wall insulation, and industrial applications. We offer pneumatic and hydraulic spraying solutions with different output capacities to meet various project requirements. Whether you are a construction contractor, insulation specialist, or equipment distributor in Panama, our team can help you select the right machine based on your application, local power supply, and production needs. Contact YG Machinery today to discuss your project, get expert equipment recommendations, and request a competitive quotation!【WhatsApp/WeChat/Phone/Skype】+86 13937183602






