

In Sweden, firewood is not a hobby. Much of the country is forested, and rural households depend on wood through long winters. Yet many small producers still run a fragmented workflow: cut here, split there, then move finished wood again by hand or loader. Each transfer adds time and strain. A Swedish customer faced exactly this problem with large logs. The fix was a firewood processing machine configured around the real workflow, not just a headline specification.
The Customer’s Challenge with a Wood Splitter Processor
The Swedish customer was producing firewood from logs large enough that pre-cutting was unavoidable. The existing process looked like this:
- Logs had to be prepared on one machine before splitting.
- The splitter sat in a separate location, so material was moved between stations.
- Finished firewood piled up near the splitting area and required another pass to clear it.
- The customer worked outdoors and wanted a self-contained setup without relying on a fixed power supply.
The requirement was not more tonnage. It was fewer touches. The customer needed a wood splitter processor that could cut, split, and move finished firewood in one continuous flow.
The Solution: YG Firewood Log Processor for One-Pass Workflow
YG Machinery recommended the YG FP-20 model. It is an industrial firewood processor built as a working setup rather than a standalone splitting wedge.
Core features selected for this order:
- Integrated chain saw prepares logs before splitting, removing the need for a separate cutting station.
- Splitting section handles the customer’s log sizes, with a knife setup matched to the desired firewood size.
- Integrated conveyor carries split wood away from the operator, keeping the work area clear.
- Hydraulic rotator assists with log positioning, reducing manual handling.
- Self-contained power unit allows outdoor operation away from a fixed supply.
- Single operating position controls cutting, splitting, and conveying for one person.
- Optional knife configuration is available for different firewood sizes.
The same platform can be quoted as a firewood processor for sale with different conveyor and knife configurations, depending on log length and output target.


Firewood Processing Machine Specifications
| Item | Specification |
| Max Splitting Force | 20T |
| Cycle Time | 8 seconds |
| Max Splitting Length | 610 mm |
| Max Splitting Diameter | 400 mm |
| Work Efficiency | 5 m³/h |
| Power | 15 HP gasoline engine |
| Engine Displacement | 420cc |
| Fuel Tank Capacity | 6.5L |
| Engine Oil Capacity | 1.1L |
| Gross Torque | 25 N.m / 2500 rpm |
| Firewood Conveyor | Length: 3.2 m; belt width: 250 mm; chute width: 400 mm |
| Hydraulic Rotator | 1 set |
| Chain Saw Length | 1.2 m |
| Chain Saw Rotate Speed | 5600 rpm |
| Sawing Speed | Adjustable |
| Oil Pump | 22 GMP, 2-stage |
| Oil Tank Capacity | 50L |
| Control Valve | One-handle, 4-directional |
| Tyre | 12″ |
| Knife | 4-way (6-way option) |
| Weight | 510 kg |
| Main Machine Package Size | 2200 × 900 × 1100 mm |
| Conveyor Package Size | 2260 × 960 × 1170 mm |


Results: Measurable Gains with a Firewood Processing Machine
After integrating the machine, the Swedish customer’s workflow changed in concrete terms:
- Output improved because cutting, splitting, and conveying happened in one pass.
- Manual log handling dropped because the hydraulic rotator and integrated saw positioned and prepared logs at the splitting station.
- The work area stayed clear because the conveyor removed finished firewood continuously.
- One person could run the line from a single operating position.
- Outdoor operation became easier with a self-contained power setup.
- Fewer transfers between machines reduced non-productive time.
For a producer comparing a log splitter processor against a separate saw-and-split setup, the advantage is not only splitting speed. It is the elimination of non-productive handling between steps. The customer also valued that the firewood processing equipment arrived as a matched set, ready for freight planning and site assembly.
FAQ About the Firewood Processing Machine
Q: How much does the machine cost for delivery to Sweden?
A: The final price depends on configuration—conveyor and knife options, for example. YG Machinery quotes factory-direct based on the exact specification. Share your log size and target output for a delivered price.
Q: Can it handle Swedish hardwood such as birch and oak?
A: Yes. The machine is configured for the customer’s log sizes, and knife options are available for different firewood sizes.
Q: Is the power unit suitable for continuous commercial use?
A: Yes. The power unit is matched to the hydraulic system for sustained operation. YG Machinery can advise on the right configuration for daily production.
Q: What is the typical delivery time to Sweden?
A: Production is scheduled after configuration confirmation. Ocean freight to a Swedish port typically adds several weeks depending on the shipping schedule. YG Machinery provides freight information for planning.
Q: Does YG Machinery provide spare parts and support for European buyers?
A: Yes. Consumable parts such as chains, knives, and hydraulic filters are available for direct order. The company supports overseas buyers with configuration guidance and replacement part identification.


About YG Machinery
YG Machinery manufactures log splitters for overseas buyers, building each machine around the customer’s log size, workflow, and power preference. For Swedish producers who need a practical firewood processor that cuts, splits, and conveys in one pass, YG Machinery offers factory-direct configuration and export support. Send us your log size, daily output target, and power preference today to receive a tailored quotation and configuration recommendation.【WhatsApp/WeChat/Phone/Skype】+86 13937183602






