

Industrial cleaning often relies on water, chemicals, or abrasive media. Each method creates secondary waste or risks surface damage. A dry ice blasting machine for sale offers a cleaner alternative. It uses solid CO₂ pellets that disappear on impact. Only the removed contaminant remains.
Dry Ice Blasting Machine for Sale: ICE-JET Specifications
The ICE-JET line covers mobile detailing work and sustained industrial use. Capacity ranges from 3 kg to 40 kg.
| Model | ICE-JET 3.0 | ICE-JET 6.0 | ICE-JET 15 | ICE-JET 40 |
| Dry Ice Capacity | 3 KG | 6 KG | 15 KG | 40 KG |
| Dry Ice Consumption | 20–50 KG/H | 20–50 KG/H | 30–100 KG/H | 30–100 KG/H |
| Supply Pressure | 3–10 bar | 13–10 bar | 3–10 bar | 3–10 bar |
| Air Consumption | 1–2 m³/min | 1–3 m³/min | 1–4 m³/min | 1–5 m³/min |
| Weight | 40 KG | 50 KG | 65 KG | 80 KG |
| Dimensions | 460×340×750 mm | 460×350×850 mm | 550×445×985 mm | 650×550×1000 mm |
| Total Power | <500 W | <800 W | <800 W | <800 W |
Smaller units suit mobile detailing and workshop use. The larger models are built for repeated cycles where the hopper stays loaded through a shift.


What a Dry Ice Cleaner Actually Does
It does not simply “blast away” dirt. Three effects work together.
Kinetic impact knocks loose material off the surface. Thermal shock rapidly cools the contaminant, causing it to crack and separate from the substrate. Sublimation turns the dry ice from solid to gas on contact. The gas expands and lifts residue away.
Media residue is zero. Water stays out. Chemicals play no part. This makes the process gentle on the substrate but aggressive on the contaminant. It can strip carbon from an engine block without touching the metal. It can clean electrical cabinets because dry ice is non-conductive.
Where a Dry Ice Car Cleaning Machine Fits Best
The machine is now common in high-end automotive restoration. It removes years of grime without removing the surface underneath.
Engine bays and undercarriages. Manual scrubbing takes hours and still leaves grease in crevices. Dry ice cleaning brings an engine bay down to a clean surface in far less time. No water reaches sensors or wiring.
Mold and tooling maintenance. Production molds collect release agents, burnt plastic, and carbon. A dry ice detailing machine can clean molds while they are still warm and in place. No disassembly is needed.
Food and pharmaceutical equipment. Dry ice is approved by the FDA, USDA, and EPA for use around food manufacturing. Conveyors, ovens, and mixers can be cleaned without a water rinse or chemical residue.
Dry Ice Blasting Machine For Sale vs. Traditional Methods
The strongest case for dry ice cleaning equipment appears in total job cost, not just machine speed.
- Abrasive blasting cuts fast but leaves spent media. That media must be collected, tested, and disposed of. It can also erode the substrate over time.
- Pressure washing pushes moisture into bearings, wiring, and sensitive assemblies. The wastewater may become a regulated stream.
- Chemical solvents create worker exposure risks and disposal costs. They can also attack rubber, plastic, and coatings.
Dry ice blasting produces no secondary waste and uses no water. The only material to manage is the contaminant that came off the surface. That changes the economics of any job where downtime or surface preservation matters.


Dry Ice Cleaner Operating Basics and Budget
Dry ice cleaning machine price depends on build quality, feeding system, and expected service life. Budget-friendly units exist, but industrial-grade systems cost more. The difference shows up in how reliably the machine feeds pellets and how long it lasts under daily use. Request a quote from suppliers to compare current pricing for your specific needs.
Proper technique protects the machine and the surface.
Nozzle distance and angle. Hold the gun at a suitable angle to the surface. Keep a moderate standoff distance and adjust for sensitive materials.
Pressure. Use a moderate setting for general cleaning. Reserve higher pressure for robust surfaces with enough air supply.
Ventilation. CO₂ is denser than air and collects near the floor. In enclosed spaces, place extraction at floor level and check oxygen levels.
Routine care. Drain the compressor moisture trap after each session. Moisture can freeze and block the feed at the next start-up. Inspect hoses and store pellets in a sealed, insulated container.
FAQ: Buying a Dry Ice Car Cleaning Machine
What air supply does each model need?
Air consumption varies by model. Please refer to the specification table above for exact figures.
Are dry ice cleaning machines for sale suitable for small workshops?
Yes. Entry-level models fit mobile detailing and small repair shops with limited space.
How much does dry ice cost to run?
Dry ice consumption depends on the model and the job. See the specification table for consumption rates.
Can it damage electrical parts?
Dry ice is non-conductive and leaves no water. It is safe around electrical cabinets when the area is properly ventilated.
What is the usual dry ice cleaning machine price range?
Prices vary by model, capacity, and features. Contact suppliers for a current quote based on your requirements.


Get a Dry Ice Blasting Machine for Sale from YG Machinery
YG Machinery (Henan Yugong Machinery Co., Ltd.) has manufactured industrial equipment since 2005. Products are exported to more than 20 countries. The company also supplies Polyurethane Spray Machines, Polyurea Coating Machines, and Industrial Log Splitters,etc.
If you are comparing options, share your cleaning volume, air supply, and surface type. YG Machinery can recommend a model and discuss related equipment before you commit.【WhatsApp/WeChat/Phone/Skype】+86 13937183602






