Hydraulic Wire Saw for Large Concrete Sections
A Hydraulic Wire Saw cuts thick concrete structures and reinforced concrete sections. It uses a diamond wire to separate material along a planned cutting line. This capability suits projects involving large concrete sections or structures that conventional saw blades struggle to cut.
Contractors can plan the cutting setup according to the structure shape and available working space. Before selecting a machine, they should review the cutting task, access conditions, and method for removing the separated concrete.
Hydraulic Wire Saw Cutting Machine Parameters
| Wire Saw Wheel Parameters | Hydraulic Pump Station Parameters | ||
| Wire Drive Mode | hydraulic | Rated Output Power | 22/25KW |
| Model Type | HM-40/80 | Working Voltage | 380v 50Hz |
| Minimum Input Power | 25HP/33HP | Hydraulic Pump Station | Gear pump |
| Output Shaft Speed | 350/940/1300r/min | Motor Working Floe | 40-100L/min |
| Maximum Wire Length | 18m | Working Pressure | 15-20Mpa |
| Feeding Method | Fully hydraulic | Oil Tank Volume | 16L |
| Wire Saw Wheel | 64kg | Weight | 98kg |
| Motor Weight | 13kg | Dimension(mm) | 650*550*1150 |
| Cutting Type | Transverse and longitudinal cutting | ||
Applications of Hydraulic Concrete Wire Saw
A Hydraulic Concrete Wire Saw serves construction and demolition projects that require controlled separation of concrete. Typical applications include:
- Bridge renovation: Cutting selected sections during repair or removal work.
- Foundation dismantling: Dividing large concrete foundations into sections for lifting and transport.
- Building renovation: Removing structural concrete sections as part of planned reconstruction.
- Industrial demolition: Cutting concrete components in factories and other industrial facilities.
- Reinforced concrete removal: Using a suitable wire and cutting arrangement to work through concrete containing steel reinforcement.
Contractors must select a Wire Saw For Reinforced Concrete according to the material, reinforcement conditions, and cutting plan. They should also determine how each separated section will receive support and removal.
Concrete Wire Saw Machine Cutting Process
A Concrete Wire Saw Machine uses a moving diamond wire to cut through concrete. The hydraulic system drives the equipment and controls its feeding movement. Main stages of operation appear below.
- Site preparation: Inspect the structure and mark the required cutting line. Check for embedded utilities and other possible hazards.
- Equipment positioning: Secure the machine and install the required guide components according to the operating instructions.
- Wire installation: Arrange the diamond wire along the planned route and check that it fits correctly.
- Controlled cutting: Start the equipment according to the manufacturer’s procedure. Monitor wire movement and the cutting process throughout the operation.
- Section removal: Confirm that the cut section has proper support before lifting or moving it. Keep personnel outside the designated exclusion zone.
Contractors should establish the cutting plan before the machine starts. Changes to the structure or cutting route may require a new assessment before work continues.
Hydraulic Wire Saw: Factors to Check Before Purchase
When comparing a Hydraulic Wire Saw Machine for Sale, focus on the intended project requirements rather than price alone.
- Cutting requirements: Define the structure type, required cut shape, and expected work volume.
- Diamond wire compatibility: Confirm that the proposed wire suits the concrete, reinforcement, and cutting conditions.
- Site layout: Check the available space for machine installation, wire routing, and concrete removal.
- Supporting equipment: Consider the lifting equipment, access arrangements, and other tools needed to complete the job.
- Technical support: Ask about operating instructions, spare parts, maintenance guidance, and after-sales service.
A Diamond Wire Saw Machine should match the actual job conditions. Before placing an order, share the project details with the supplier and confirm the proposed configuration, included components, and service arrangements.
Hydraulic Wire Saw FAQ
Q1: Does the diamond wire need replacement after every cutting job?
A: Not necessarily. Its service life depends on the wire quality, concrete properties, reinforcement, and operating conditions. Inspect the wire regularly and replace it when its condition no longer meets the manufacturer’s requirements.
Q2: Can a wire saw produce a finished concrete surface?
A: The resulting surface depends on the cutting setup, wire condition, operator control, and material. If the project requires a specific surface finish or dimensional tolerance, explain the requirements to the supplier before selecting the equipment.
Q3: Can the machine perform angled or specially shaped cuts?
A: The listed equipment specifications identify transverse and longitudinal cutting. Contractors should confirm special angles or other cutting geometries with the supplier before ordering, as suitability depends on the required setup and site conditions.
About YG Machinery and Related Equipment
YG Machinery supplies construction equipment for concrete processing and other industrial applications. The team provides product information and configuration support for different project requirements.
In addition to wire cutting equipment, customers can ask about the Hydraulic Wall Saw for concrete wall cutting applications. Sharing the structure type, cutting requirements, and site conditions helps the team assess suitable equipment and prepare a quotation.
Contact YG Machinery to discuss your project and request details about the available concrete cutting solutions.【WhatsApp/WeChat/Phone/Skype】+86 13937183602
